AVHzY CT-2 USB Power Meter Load Tester Voltage Detector

Category:

For more information and discussion, please go and visit the buyer forum
https://forum.avhzy.com/

ユーザープレーヤーフォーラムを訪問して多くのサーポートを取得できます。リンク:

https://forum.avhzy.com/

Download manuals firmware and PC software
Adjustable Constant Electronic Load Manuals

— History Versions —
https://drive.google.com/open?id=1wzdOJ78Xi_gW3Ro9kkmVjaxp_k0OeVRw

Amazon USAmazon UKAmazon DE / Amazon FR / Amazon ES / Amazon IT / Amazon AU

Reading the manual is the first priority
How to monitor the voltage and current between type-C devices?
1. Make sure the PD trigger switch on the meter is turned off.
2. Connect the charger and the meter with a type-C cable, and then connect the meter and the mobile phone (or something else) with another type-C cable.
3. If the screen didn’t light up, flip the cable on any side of the meter.

Features:

  • Basic USB Meter Features

–Voltage and current monitoring with 0.0001V, 0.0001A resolution, 0.05% precision.

–Interfaces supported for both USB-A and USB Type-C devices.

–Voltage and current curve painting with sample rate up to 100 samples per second.(Note: Curve painting mode only, recording cannot be done at that rate)

–5 groups of capacity, energy, time recording.

–D+ D- voltage measure with 0.01V resolution, 2% precision.

 

  • Fast Charge Features

PD2.0, PD3.0 with PPS (Programmable Power Supply) trigger supported

QC2.0 (5V/9V/12V/20V), QC3.0, QC4.0 (Or PPS) trigger supported.

Samsung AFC 9V, Huawei FCP 9V, Huawei SCP 4.5V trigger supported.

Apple 2.4A trigger supported.

Apple MFI cable authorization test (Reference only).

Protocol recognize for QC2.0-5V/9V/12V/20V, QC3.0, Apple 0.5A/1A/2.1A/2.4A, USB-DCP, Huawei FCP/SCP, Samsung AFC.

Auto enumerate protocols function for chargers/power banks.

  • Offline Curve Recording

Offline curve recording with 4 datasets, 3750 data points per set. Programmable recording rate, record start/stop threshold. Curves can be uploaded to PC software for further analysis.

 

  • Power Delivery Protocol Analysis

 — Power Delivery protocol listener (or analyzer) with full packets analysis for PD developers. PC software provided.

 

  • Cable ESR Test

Cable ESR test supported for Type-A to Type-C and Type-C to Type-C cables.

— 4-line ESR test method software supported, accessory not provided.

 

  • Tool-less Firmware Update

–Firmware can be updated by PC software directly, for PC software (with corresponding firmware inside), please visit official website of AVHzY.

 

  • Utilities

 –One temperature sensor on board with 0.1C resolution.

 –One calendar/digital clock, can be used when the device is not occupied.

Parameters:
Main Control IC:STM32 F072
Display screen:TFT 1.44″ 128*128
Voltage Current Scale :DC 4-26V 0-6A (0.1-26V with independent micro USB supplied)
Voltage Current Resolution:0.0001V 0.0001A
Voltage Current Accuracy:0.1%+2d
Current Sample Point:High-side
Overall Internal Resistance(Type-A & Type-C):28mOhm (After 1000 cycles)
Quiescent Current:0.4mA (At DC 5V)
Self-Power Solution:DCDC
Time Accuracy:0.002%

Electronic Load Parameters:
Applied voltage range: DC 3.7V-13V
Adjustable current range: 0.15A-3.00A
Electricity discharging: continuous 15W
Temperature control: about 40 ℃

Package includes:
1 X USB Meter,1 X USB Electronic Load,1 X Quick Tour.


One Response to AVHzY CT-2 USB Power Meter Load Tester Voltage Detector
  1. What is the best way to test the Battery capacity in mAh of a Power Bank?
    Best Regards
    Keith Pitts


[top]

Leave a Reply

您的电子邮箱地址不会被公开。 必填项已用*标注